The Quick Hinge Breach Door System allows training to be conducted using commercial off-the-shelf doors to provide realistic breaching using real doors with real door properties. There are no ballistic pins to insert or replace, no special panels to install, and no tools required to employ the Quick Hinge Breach Door. Minimal set-up requirements and quick reset intervals ensures maximum training time and low-cost consumables makes the breach door economical. It supports all mechanical, shotgun, and explosive breaching techniques and allows you to choose the door type so you have flexibility for mission specific training. The heavy gauge steel Fixed Frame accepts standard 36 width wood and steel doors (hollow and solid core) which insert easily into the frame and are quickly secured by tightening hand-knob clamp screws. The frame accepts door thicknesses from 1-3/8 to 1-3/4. Adaptable to your training needs, the Quick Hinge Breach Door System is provided with pre-drilled mounting tabs for permanent installation in existing training facilities, shoot houses, or breach bays. An optional base allows it to be a mobile, free-standing training system that can be transported to alternate sites. The option of right or left swing-in is offered.
Quick Hinge Demos
#1 During this demonstration of Range Systems Quick Hinge Breach Door System, two explosive charges are placed on a solid wood door. A “C” charge at the doorknob and a Flex Linear charge on the hinge side have an equivalent explosive weight of 0.24 lbs of TNT.
#2 During this demonstration of Range Systems Quick Hinge Breach Door System, a Sliding Uli-knot charge is placed near the door hinges and a 24″ Strip charge is placed in between the door knob and strike plate on a solid wood door. The equivalent explosive weight on this door is 0.21lbs of TNT.
#3 During this demonstration of Range Systems Quick Hinge Breach Door System, a Water Impulse charge consisting of 11 feet of DET cord, S-rolled in between two IV fluid bags, and a Doughnut charge have been placed on a steel door. The equivalent explosive weight on this door is 0.13 lbs of TNT.
There are no reviews yet.