Accommodates rounds with minimum velocities of 600 FPS up to a maximum of .308/7.62mm and also defeats US Army 5.56 M855 Green Tip. Encapsulator™ system features 3/8 inch AR500 steel back plate with 2 inch Dura-Panel™ covering and Dura-Blocs™. The proprietary compression system holds the Dura-Blocs™ in place and allows them to be rotated from high volume areas to extend life-cycle. The tubular steel base features heavy-duty locking casters for mobility and four side handles assist with maneuvering the trap into location. Shooting surface area is 24" w x 45" h.

#60_21_004
Wt. 740 lbs.
Dims: 79" h x 28" w x 26" d

Provides all the capabilities and features of the standard Portable Encapsulator™ Bloc Trap with the addition of Dura-Panel™ ballistic rubber shields on front and sides of bullet trap frame and base.

#60_21_056
Wt: 1,056 lbs.

Provides safe target engagement at acute angles up to 70 degrees without concern of ricochet or backsplatter, making it ideal for tactical training scenarios. Accommodates rounds with minimum velocities of 600 FPS up to a maximum of .308/7.62mm and also defeats US Army 5.56 M855 Green Tip. Encapsulator™ system features 3/8 inch AR500 steel back plate with 2 inch Dura-Panel™ covering and Dura-Blocs™ with angled corners. The tubular steel base features heavy-duty locking casters for mobility and two handles on the backside of the trap assist with maneuvering it into location. Shooting surface area is 24"w x 44"h.

#60_21_058
Dims: 79"h x 28" w x 26" d
Wt. 700 lbs.

A. Mini Portable Encapsulator™
Accommodates rounds with minimum velocities of 600 FPS up to a maximum of .308/7.62mm and also defeats US Army 5.56 M855 Green Tip. Encapsulator™ system features 3/8 inch AR500 steel back plate with 2 inch Dura-Panel™covering and Dura-Blocs™ to provide a 24" w x 27" h shooting surface. The tubular steel base features swivel casters for mobility.

#60_21_008
Dims: 56" h x 28" w x 26" d
Wt. 466 lbs.

B. Portable Encapsulator™ Front Shield
Dura-Panel™ ballistic rubber shields front of bullet trap base from errant shots. Front Shield can be added to Portable Encapsulator™, 2.5D Encapsulator™, or Mini Portable Encapsulator™ bullet traps at time of order:

#60_21_017
Wt: 108 lbs.

Dura-Panel™ ballistic rubber shields front of base and casters from errant shots. Full Frontal Shield can be added to Portable, 2.5D, or Mini Portable Encapsulator™ bullet traps. Must be specified at time of order:

#60_21_057
Wt. 146 lbs.

The Portable Tactical Trap is constructed of AR500 steel back plate with 2 inch ballistic steel edges and faced with 2 inch thick Dura-Panel™ ballistic rubber surface. The trap features a LOK-TITE™ mounting system which allows it to be securely fastened to a stand or wall-mounted. Simply hook the back of trap to the stand or on the wall-mount using the LOK-TITE™ system – no other assembly is required. The Portable Tactical Trap provides a 24"w x 36"h shooting area with the lower edge of the shooting surface 34" off the floor when stand-mounted. H-Stand base is 30-3/8" W x 30" D. Overall unit height of trap on stand is 70-1/4".


3/8” AR500 Portable Tactical Trap on H-Stand.
Rated for .223/5.56 ball ammunition
#60_21_005
Wt. 239 lbs.


1/2" AR500 Portable Tactical Trap on H-Stand.
Rated for .308/7.62 ball ammunition.
#60_21_007
Wt. 269 lbs.


Caster Kit for Stand
Full swivel and locking casters offer stable mobility even over rough surfaces. Easy bolt-on installation.
#60_21_ 013
Wt. 7 lbs


3/8" AR500 Portable Tactical Trap with Wall-Mount.
Rated for .223/5.56 ball ammunition.
#60_21_010
Wt. 172 lbs.


1/2" AR500 Portable Tactical Trap with Wall-Mount.
Rated for .308/7.62 ball ammunition.
#60_21_011
Wt. 198 lbs.

The Super Portable Tactical Trap is constructed of AR500 steel back plate with 2 inch ballistic steel edges and faced with 2inch thick Dura-Panel™ ballistic rubber surface. The trap features dual LOK-TITE™ mounting brackets which allows it to be securely fastened to the sturdy two-post mounting stand. Lift handles on the back of the trap assist in positioning the trap onto the stand. The Super Portable Tactical Trap provides a 36"w x 48"h shooting area with the lower edge of the shooting surface 19 ½" off the floor. Stand base is 56" W x 30" D. Overall unit height of trap is 68".


3/8" AR500 Super Portable Tactical Trap.
Rated for .223/5.56 ball ammunition.
#60_21_009
Wt. 412 lbs.


1/2" AR500 Super Portable Tactical Trap.
Rated for .308/7.62 ball ammunition
#60_21_023
Wt. 610 lbs

Constructed of 3/8" AR500 steel construction with 2 inch thick Dura-Panel™ ballistic rubber surface. The trap sits at a 20 degree angle on its built-in stand. Shooting surface area is 24" x 24".


#60_21_014
Wt. 106 lbs.
Dims: 24"H x 24"W x 20" D

The New 4' x 5' Portable Encapsulator™ bullet trap provides a large target area but is small enough to fit through a standard 36" doorway. Encapsulator™ system is constructed of 3/8" AR500 steel backplate covered with 2" Dura-Panel™ and finished with Dura-Blocs™. Two compression systems hold the Dura-Blocs™ securely in place to provide a 48"W x 60"H shooting surface. The lower front edge of the trap is covered with Dura-Panel™ for ballistic protection from misdirected rounds. The heavy-duty casters allow for easy mobility and the mounted hand brackets on the back of the trap assist with maneuvering.


#60_21_027
Wt. 1,940 lbs.
Dims: 78-3/4"H x 48"W x 32"D

Provides a massive target surface area of 48"W x 96"H. Encapsulator™ system is constructed of 3/8" AR500 steel backplate covered with 2 inch Dura-Panel™ and finished with Dura-Bloc™ ballistic rubber. Two compression systems hold the Dura-Blocs™ securely in place and the lower front edge of the trap is covered with Dura-Panel™ for ballistic protection from misdirected rounds. The heavy-duty swivel and locking wheels allow for easy mobility. For permanent placement, the wheels can be removed and the bullet trap can be floor mounted with the built-in mounting plates.


#60_19_014
Wt. 2,645 lbs.
Dims: 99"H x 48"W x 62"D

Constructed of three 4' W x 8" H Encapsulator™ sections to form a 12 foot wide bullet trap. Sections are bolted together with our AR500 steel seam plates. Encapsulator™ system is constructed of 3/8" AR500 steel backplate covered with 2 inch Dura-Panel™ and finished with Dura-Bloc™ ballistic rubber. Six compression systems hold the Dura-Blocs™ securely in place and the lower front edge of the trap is covered with Dura-Panel™ for ballistic protection from misdirected rounds. A concrete pad is recommended to support the wall.


#60_19_014

This all inclusive system is ideal for in-home or range use. Encapsulator™ bullet trap captures rounds virtually intact, reducing the hazards of ricochet, splatter and lead particles. Its self-healing properties seal the bullet's path after the round has penetrated the surface so each bullet is encapsulated inside the ballistic rubber block. The wall trap includes our patented rubber composite products, proprietary compression plate system, 3/8" AR500 ballistic steel, and necessary structural components for a 4'W x 8"H bullet trap wall. Installation is not included. Custom sizes and configurations are available.


#60_19_004

The Gran Trap is designed for high volume shooting and captures rounds without back-splatter or ricochet. It is rated for standard grade .308/7.62mm ammunition. The depth of the rubber granular material is 24" and fills the support frame to stop and contains bullets virtually intact, reducing the hazards of ricochet and splatter. The shooting surface is inclined to the direction of incoming rounds and Dura-Panel™ ballistic rubber with 3/8" AR500 steel plate back forms the front edge of the trap to confine the rubber granulate fill and capture misdirected rounds. Removable wheels allow the trap to be mobile or it can be bolted to the floor with the built-in mounting plates for a more permanent placement. The shooting surface area of the Portable Gran Trap is 48"W x 96"L.


#60_19_015
Wt. 2,000 lbs.
Dims: 78"H x 49"W x 100"D